background image

SBC35-427/BIOS Settings

v1.0

www.winsystems.com

Page 24

Feature

Description

Choices

Default

Quiet Boot

Enables/disables quiet boot. Enabling this option 

hides the BIOS post messages on bootup and 

displays the AMI BIOS logo. This logo is configurable 

for custom OEM applications. Contact a 

WINSYSTEMS Applications Engineer at 1-817-274-

7553 for more information.

Enable. 

Disable

Disable

Setup Prompt 

Timeout

Sets the number of seconds to wait for the setup 

activation key. A value of 65535 (0xFFFF) means 

indefinite waiting.

1 to 65535

1

Bootup NumLock 

State

Selects the default keyboard NumLock state.

On, Off

On

OS Selection

Selects the target operating system. Other menu 

options may change based on the OS selection. This 

is proper behavior.

Windows, 

Linux, MS-

DOS

Windows

Real Time Option Enables/disables the following real time features:

L2 cache partitioning to decrease access latency

PCIE packet prioritization based on traffic class

Hardware-assisted time synchronization

RT Disabled, 

RT Enabled

RT Disabled

Boot Option 

Priorities

All bootable options are listed in the order of boot priority. The list can be 

rearranged to the desired boot device order.

Fast Boot

Enables/disables the Fast Boot features, which 

shorten the normal boot path for booting into an OS 

rapidly. Most device probes are skipped to reduce 

boot time.

Enable. 

Disable

Disable

New  Boot 

Option Policy

Controls the placement in the boot order of newly 

detected UEFI boot options. If default is selected, a 

new device is moved to the bottom of the boot 

priority list but in front of the UEFI shell. Other 

options are the top or the bottom of the list.

Default, 

Place First, 

Place Last

Default

CSM Support Enables/disables Compatibility Support Module 

(CSM), which provides legacy BIOS compatibility by 

emulating a BIOS environment, allowing legacy 

operating systems and some option ROMs that do 

not support UEFI to still be used.

Enable. 

Disable

Disable

Primary  IGFX 

Boot Display

Selects the video device which will be activated 

during POST. Secondary boot display selection 

appears based on your selection.

NOTE: 

This option is only available when CSM 

Support is enabled.

Auto, 

Display Port 

1, Display 

Port 2, LVDS

Auto

GateA20 

Active

Enabling the Gate-A20 line is an early step that a 

protected-mode x86 operating system does in the 

bootup process.

Upon Request - can be disabled using BIOS ser-

vices.

Always - GA20 never disabled; this option is use-

ful when any RT code is executed above 1 MB.

NOTE: 

This option is only available when CSM 

Support is enabled.

Upon 

Request, 

Always

Upon 

Request

INT19  Trap 

Response

Specifies the timing for executing an INT19 trap. INT 

19h is a low-level system command normally used 

just after POST to boot the OS.

Immediate - execute the trap right away.

Postponed - execute the trap during legacy 

boot.

NOTE: 

This option is only available when CSM 

Support is enabled.

Immediate, 

Postponed

Immediate

Содержание SBC35-427

































Отзывы: