SBC35-427/BIOS Settings
v1.0
www.winsystems.com
Page 13
4.3.5 SATA
Adjust controls for the two available SATA ports.
LVDS Bridge
Enables/disables LVDS Bridge, which provides
configuration options for the LVDS panel
interface. Must be enabled if LP is selected as a
video source.
Enable,
Disable
Disable
IGD Flat Panel
Selects the panel resolution. If the desired
resolution is not available, use the Custom
Profile option and adjust the settings to match
your panel.
NOTE:
LVDS Bridge must be enabled to view
this option.
640 x 480,
800 x 480,
800 x 600,
1024 x 768,
1280 x 720,
1366 x 768,
1600 x 900,
1920 x 1080,
Custom Profile
1024 x 768
LCD Panel
Brightness
Adjusts the intensity of the LCD panel.
NOTE:
LVDS Bridge must be enabled to view
this option.
12.5%, 25%,
37.5%, 50%,
62.5%, 75%,
87.5%, 100%
50%
Bpp Select
Selects the LVDS color depth, either 18 or 24
bits per pixel.
NOTE:
LVDS Bridge must be enabled to view
this option.
18 bpp, 24 bpp 18 bpp
Custom Profile
Settings
Configure the parameters according to the specific LVDS panel specification.
NOTE:
LVDS Bridge must be enabled, as well as IGD Flat Panel set to Custom
Profile to view this option.
•
Pixel Clock in
kHz
Pixel clock in kilohertz
10 to 655000
2500
•
H Active Pixels Active pixels, horizontal
480 to 1920
1920
•
H Blank Pixels
Blank pixels, horizontal
0 to 1000
160
•
H Offset Pixels Offset pixels, horizontal
0 to 1000
16
•
H Width Pixels Width pixels, horizontal
0 to 1000
96
•
V Active Lines
Active lines, vertical
480 to 1080
1080
•
V Blank Lines
Blank lines, vertical
0 to 1000
45
•
V Offset Lines
Offset lines, vertical
0 to 50
10
•
V Width Lines
Width lines, vertical
0 to 50
2
Feature
Description
Choices
Default
Feature
Description
Choices
Default
SATA Port 0
Enables/disables the SATA port at connector J3.
Enable,
Disable
Enable
Port 0
Displays “Not Installed” if no device is present.
Otherwise, the device information is displayed.
SATA Port 1
Enables/disables the SATA port on the PCIe Mini-
Card.
Enable,
Disable
Enable
Port 1
Displays “Not Installed” if no device is present.
Otherwise, the device information is displayed.
