WinSystems PPC65-1210S, Руководство по эксплуатации продукта

Страница: 72 / 79

110912 PRODUCT MANUAL PPC65 72
5.3 I forgot my system BIOS password. What am I supposed to do?
You can simply short 2- on JP9 to clean your password.
5.4 I’d like to know the System Memory Address Map
Each on-board device in the system is assigned a set of memory addresses, which also can be identical to the device.
The following table lists the system memory address used for your reference.
5.5 I’d like to know more about the BIOS Setting
It is assumed that users have correctly adopted modules and connected all the device cables required before turning
on DC12V power. Good examples of devices requiring attention include the 200-pin DDR2 SDRAM, keyboard, mouse,
SATA hard disk, VGA connector, device power cables, and ATX accessories. With no assurance of properly and correctly
connecting these modules and devices, it is very possible to encounter system failures that result in a malfunction of any
device.
To ensure you have a successful start with the built-in Mini-ITX board, it is recommended, when going with the bootup
sequence, hit the
DEL key and enter the BIOS Setup menu to tune up a stable BIOS configuration so that you can wake
up your system.
Loading the default optimal setting
When prompted with the main Setup menu, please scroll down to Load Optimal Defaults , press ENTER and Y to
load in defaults optimal to the BIOS setup. This will force your BIOS setting back to its initial factory configuration. It is
recommended to do this to ensure the system is running with the BIOS setting that WinSystems has highly endorsed.
Users can load the default BIOS setting any time when the system appears to be unstable in boot up sequence.
Auto Detect Hard Disks
In the BIOS => Standard CMOS Setup menu, pick up any one from Primary/Secondary Master/Slave IDE ports, and press
ENTER . Setup the selected IDE port and its access mode to Auto . This will force the system to automatically pick up the
IDE devices that are being connected each time system boots up.