WinSystems PPC65-1210S, Руководство по эксплуатации продукта

Страница: 23 / 79

110912 PRODUCT MANUAL PPC65 2
CHAPTER 2
Hardware Configuration
2.1 Jumper Setting
The PPC65 Panel PC is fully integrated at a system assembly line before shipment. Additional assembly by end users is
not required unless installing the optional HDD or CompactFlash.
This chapter outlines the definitions and shows the positions of jumpers, headers and connectors for reference.
All of the configuration jumpers on the built-in Mini-ITX board are in the proper position. The default settings are indicated.
In general, jumpers on the Single Board Computer are used to select options for certain features. Some of the jumpers
are designed to be user-configurable, allowing for system enhancement. The others are for testing purposes only and
should not be altered. To select any option, cover the jumper cap over (Short) or remove (“Not Connect” (NC)) from the
jumper pins according to the following instructions.
Top-side Jumper and Connector Locations