ITX-F-3800/Configuration
v1.0
www.winsystems.com
Page 23
7.4.16 Additional Information
To install a mini PCIe/mSATA into MC1 or M.2 B Key Mini Card into M2SSD:
7.5 Jumpers
7.5.1 JCMOS - CMOS Data Clear
Jumpers can be used to reset the BIOS CMOS settings to the factory default. Enable/
disable the clear CMOS function hardware circuit, by placing or removing the jumper
from JCMOS as needed.
To reset the BIOS CMOS configuration to the factory default settings:
1. Remove power from the ITX-F-3800.
71
GND
72
+3.3V
73
GND
74
+3.3V
75
GND
Pin
Description
Pin
Description
1. Insert the mini PCIe/mSATA or M.2 B Key Mini Card.
2. Push the free end of the card toward the circuit board and then secure it
with either two (2 mm) screws for PCIe/mSATA card (WinSystems P/N
G527-0000-400) or one (3 mm screw) for M.2 B Key Mini Card
(WinSystems P/N 527-000A-303).
