WinSystems EBC-C413 Скачать руководство пользователя страница 2

Страница: 2 / 83

EBC-C413

v1.2

www.winsystems.com

Page 2

Revision History

Copyright and Trademarks

No part of this document may be copied or reproduced in any form or by

any means without the prior written consent of WINSYSTEMS, Inc. The

information in the document is subject to change without notice. The

information furnished by WINSYSTEMS, Inc. in this publication is believed

to be accurate and reliable. However, WINSYSTEMS, Inc. makes no

warranty, express, statutory, implied or by description, regarding the

information set forth herein or regarding the freedom of the described

devices from patent infringement. WINSYSTEMS, Inc. makes no warranty

of merchantability or fitness for any purpose. WINSYSTEMS, Inc. assumes

no responsibility for any errors that may appear in this document.

Trademark Acknowledgments

WINSYSTEMS is a registered trademark of WINSYSTEMS, Inc.

Duo-Clasp and Pico-Clasp are trademarks of Molex, Inc.

InsydeH2O is a registered trademark of Insyde Software.

Intel and Intel Atom are trademarks of Intel Corporation or its subsidiaries

in the U.S. and/or other countries.

DisplayPort, the DisplayPort logo, and VESA are trademarks owned by the

Video Electronics Standards Association (VESA) in the United States and

other countries.

Microsoft

and Windows are either registered trademarks or trademarks of

Microsoft Corporation in the United States and/or other countries.

All other marks are the property of their respective companies.

Document

Version

Last Updated

Date

Brief Description of Change

v1.0

11/2016

Initial release

v1.1

5/2017

Added DIO jumpers

v1.2

11/2018

Added FPGA Configuration EEPROM

v2,0

11/2019

Rebranded manual, updated graphics, fixed jumper name JPSATA to

JPMSATA under section 7.1.3, fixed various typos

Содержание EBC-C413




















































































Результаты поиска

Содержание EBC-C413

Отзывы:

Похожие инструкции для EBC-C413

Бренды по названию

Популярные бренды

WinSystems EBC-C413, Руководство по эксплуатации продукта

Результаты поиска

Содержание EBC-C413

Отзывы:

Похожие инструкции для EBC-C413

Бренды по названию

Популярные бренды