REPLACE ON/OFF SWITCH
(ITEM NO.55)
Tools:
Nut Driver-5/8”; Phillips Screwdriver #2.
Procedure:
1.
DANGER :
Turn off electrical power and disconnect electrical power supply. If unit is
hardwired,
CIRCUIT BREAKER MUST BE OFF.
2. Remove the two (2) screws securing eyebrow to relay panel and save for reuse.
3. Remove the four (4) screws securing escutcheon to relay panel and save for reuse.
CAUTION:
Utilize care to prevent escutcheon from falling forward when removing these
screws. Lower escutcheon slowly until secure in open position.
4. Remove hex nut securing power switch to escutcheon. Remove switch guard from switch.
5.
Remove
old power switch from escutcheon.
DO NOT REMOVE WIRES FROM
6. Position new power switch in escutcheon and adjust knurled nut to allow proper extension
7. Position switch guard on switch stem, replace and tighten hex nut being certain to keep
8. Hold old power switch beside new, and working left to right, transfer wires to new power
9. Replace the four (4) screws securing escutcheon to relay panel.
10. Replace the two (2) screws securing eyebrow to relay panel and place unit back into
REPLACE LID VALVE O-RING
(ITEM NO. 6)
Tools:
Slotted Screwdriver - l/8”.
Procedure:
1.
DANGER:
Turn off electrical power and disconnect electrical power supply. If unit is
hardwired,
CIRCUIT BREAKER MUST BE OFF.
WINSTON
34
LIT.6710/REV.0/9-91
Save switch guard for reuse.
SWITCH AT THIS TIME.
of switch stem beyond escutcheon.
switch guard straight.
switch
service.
Содержание OF49P32SJ
Страница 6: ...Behind 43 37 38 39 40 41 44 If Applicable 42 WINSTON 6 LIT 6710 REV 0 9 91 NOTE 6 Head Model Picture...
Страница 7: ...WINSTON 7 LIT 6710 REV 0 9 91 45 46 47 48 49 50 51 52 53 54 55 Inside Behind...
Страница 8: ...WINSTON 8 LIT 6710 REV 0 9 91 62 Behind 57 56 58 59 60 61 NOTE 6 Head Model Pictured...
