Winnix Technologies co., Limited
8/12
2) Reader Address Setting
Picture 5 Setting Reader ADDR
If you want to amend the address of the reader, you can choose the new address under the frame of
the amending address column of the reader. Then click the “set” button. The new address will be
effective when reader reposition
3) Work Mode Choice
Picture6 Setting Working Mode
Users can configure the work mode of the reader through single choosing frame. When choosing the
command, reader can set radio frequency parameter and antenna (multicenter matching style) at the
same time, and other part become gray. When choosing timing or touching off mode Reader can set
the parameter of radio frequency timer and communication interface. If choosing touching off mode, it
can set the parameter of the trigger. We will describe them one by on as the following.
Picture 7 Setting RF
Users can set the power and frequency of the radio frequency according application need. The largest
power parameter can be 30dBm.You can choose China standard (920MHZ~925MHZ) or FCC
(902MHZ~928MHZ) as the frequency of radio frequency, other frequency bands need customize.
4) Antenna Setting
When using multicenter readers, you can choose antenna,, Choosing the corresponding antenna in
the check box means antenna invocation.
5) Read Indicate
Buzzer and LED are optional, for reader to choose, users can choose them according to demand.
