2-5
SECTION 2
DRIVING YOUR MOTOR HOME
·
Lower seat cushion while positioning the side
pegs into the angled notches on the seat rails.
NOTE: Notches to be used depends on angle
of recline desired. The farther forward, the
greater the angle of recline.
LOUNGE SEAT - Models 222FD & 222HD
The swivel/slider lounge seat provides addi-
tional passenger seating.
The swivel will lock in the center facing posi-
tion for your safety while the vehicle is moving.
Swivel:
Pull up on the swivel lever located on the
lower left hand side of the seat. The seat will lock
into place whenever it reaches the center aisle
facing position.
Always return the seat to the aisle facing position
for proper use of seat belts while traveling.
Slide:
Pull up on the slide lever located on the
lower left hand side of the seat. Slide to the de-
sired position and release the lever.
SEAT BELTS
Seats intended for occupancy while the vehi-
cle is in motion are equipped with seat belts for
the protection of the driver and passengers. The
lap belts must be worn as low as possible and fit
snugly across the hip area. Always sit erect and
well back into the seat. To gain full protection of
the safety belt, never let more than one person use
the same safety belt at any one time, and do not
let the safety belts become damaged by pinching
them in the doors or in the seat mechanism. After
any serious accident, any safety belts which were
in use at the time should be replaced.
To Fasten and Adjust
The 3-point seat belts in your coach are
equipped with automatic locking retractors that
let you easily adjust your seat belt to the proper
length for passenger safety.
·
Grasp the end of the belt and pull smoothly
outward from the seat to the required length,
then insert into buckle. Be sure belt is not
twisted before fastening.
·
Feed any excess belt length back toward the
seat so the belt retractor will lock the belt at
the proper length for your body when re-
leased.
·
Do not jerk the belt or pull out too quickly be-
cause it will lock prematurely and require you
to reset the belt retractor.
·
Reset the belt retractor by letting the belt go
all the way back to the starting point, then
pull slowly and smoothly outward.
To Release:
Depress button on end of buckle and pull belt
out of buckle.
Hold onto the tongue when you release it
from the buckle to keep it from retracting too rap-
idly.
Lift to
Slide
Lift to
Swivel
PRESS
TO
RELEASE
