SECTION 4 –
APPLIANCES AND SYSTEMS
4-6
Heat Sources
NOTE: The diesel burner is the primary heat
source. It becomes secondary to the
electric heat source until it cannot meet
the demand. The burner will start if it is
enabled.
Diesel
- Activate the Furnace, and the burner
will light and go through its normal operating
cycle. It will cycle on/off in 5 to 10 minute
intervals.
Electric
- Turn on AC Heating element
depending on the service available and the power
load of the coach. Example: If you have 30 amp
or only 20 amp service available.
Basic Operation
•
Press anywhere on the touchscreen to
activate the menu options.
•
Hot Water Icon
, the system will cycle and
maintain the hot water heat exchanger so that
hot water is available on demand.
NOTE: The In order for the hot water to be
maintained, either the electric icon or the
burner icons must be selected. (Or both).
NOTICE
If operating the heating system, always
maintain 1/4 tank of diesel fuel to ensure
proper system operation.The heating
system will shut down if the diesel fuel
tank is below 1/4 tank. The system is
designed to prevent you from depleting
the entire fuel tank.
AC Electrical Element Selector
(Located near monitor panel)
-Typical View
LCD Panel
(Located near monitor panel)
-Typical View