4-3
SECTION 4 –
APPLIANCES AND SYSTEMS
Normal vehicle leveling to provide comfort
for the occupants is satisfactory for refrigerator
operation.
Basic Operation
•
Press the
ON/OFF
button to start the
refrigerator.
•
If the display code reads “
no
” there is no
electricity or gas available to operate the
refrigerator. Open the propane tank valve or
connect the shoreline.
•
Press the
MODE
button to select energy
source. There are three settings:
LP
(Gas Mode) - Refrigerator will operate on
gas from the propane tank if the main valve is
open and the tank contains gas.
AC
(Electric Mode) - Refrigerator will
operate on 120-VAC household current if the
shoreline is connected or the auxiliary
generator is running.
AU
(Automatic Mode) -
Refrigerator will
automatically start operating on 120-VAC
household current if the shoreline is
connected or the auxiliary generator is
running. If electricity is lost, it will
automatically switch over to LP gas operation
if gas is available.
•
Press the
TEMP SET
button to change
temperature setting from 1 to 9 on display.
Start at the ‘coldest’ setting to ensure coldest
temperature in the freezer compartment, then
adjust warmer as necessary after cold food has
been added.
NOTE: The refrigerator will retain temperature
more efficiently if food is already cold
before placing inside.
Further Information
Refer to the manufacturer’s user guide
provided in your InfoCase for complete operating
instructions, safety precautions, and maintenance
information.
NOTICE
To prevent permanent damage to the
refrigerator cooling unit, turn the
refrigerator off if the vehicle will be parked
on an incline of over 3
side-to-side or 6
front-to-rear (such as steep driveways or
parking lots, etc.) for more than one hour.
Place bubble level in bottom of refrigerator
Bubble must be at least 1/2 inside circle
-Typical View
