SECTION 10 –
SLIDEOUT ROOMS
10-6
6. Push slideout room in to travel position,
ensuring both sides are relatively even.
NOTE: Several people may be needed to push
the room in.
7. When the slideout room is fully retracted,
secure the room with a support item (e.g. 2x4
wood board) above the interior slideout room
to secure room during travel.
NOTE: For larger slideout rooms, place a travel
support item on each end of the interior
slideout room.
8. See your dealer for service of the slideout
motors before using again.
Further Information
Please refer to the slideout manufacturer’s
user guide provided in your InfoCase for further
instructions and troubleshooting information.
GENERAL SLIDEOUT CARE
•
Keep slideout room seals clean.
•
Clean the floors inside the coach before
retracting the slideout room to avoid floor
scratches or carpet pile snags.
•
Wipe outer slideout room seals occasionally
with talc or 303 brand protectant for smooth,
quiet operation.
•
See your authorized dealer for regular
maintenance and service of the slideout
mechanism.
Slideout Room Seal Care and
Maintenance
While most household cleaners work well for
cleaning slideout room seals, certain chemical
agents may cause the seals to degrade. Typically,
409
®
and Lysol
®
type products work well. Use a
product, such as Armor All
®
to keep seals soft.
In addition, certain caulks and sealers may
include chemicals that may adversely effect the
performance of the seals. See your authorized
dealer for caulks and sealers recommended for
your coach.
• Ensure slideout motor is disengaged
approximately 1/2” from base.
Slideout Travel Support
-Typical installation shown
• Place support item (e.g. 2x4 wood
board) above interior slideout room as
shown.