3-5
SECTION 3 –
DRIVING YOUR MOTORHOME
Further Information
Refer to the manufacturer’s user manual
provided in your InfoCase for further
information.
MIRRORS – POWER SIDEVIEW
EXTERIOR
–If Equipped
Always adjust mirrors for maximum rear
visibility before traveling. Make sure the seat is
adjusted for proper vehicle control and that you
are sitting back squarely into the seat.
The mirrors may also contain heating
elements to de-fog or de-ice the mirror glass
during cold weather operation. An ON-OFF
switch for the mirror heaters is located near the
remote mirror controls.
The ignition switch must be on to operate
mirror controls and heaters.
Sideview Camera
–If Equipped
The sideview cameras (built into the driver
and passenger side mirrors) activate with the
corresponding turn signals and replace the rear
camera view on the monitor until the turn is
completed or the signal lever is canceled
manually.
Mirror Head Adjustment
If you cannot adjust a mirror properly using
the control switch, the mirror may need a coarse
adjustment by rotating the mirror head.
Further Information
Refer to the manufacturer’s user manual
provided in your InfoCase for further
information.
Mirror Adjustment Control
•Mirror surface tilts in direction of arrow button
pressed.
•Middle switch selects L or R mirror to adjust.
•Center position is “neutral” to disable arrow
buttons and prevent misadjustment of mirrors.
Mirror Heat
Switch
•The mirrors can be folded back
against the cab doors, if needed.
•Sideview Camera