3-1
5 - DASH / AUT
O
SECTION 3 DRIVING YOUR MOTOR HOME
The information in this section refers only to
features installed or adapted to the dash and
driver compartment area by Winnebago
Industries. It also includes passenger seating in
the living area of the coach.
See your chassis owner’s manual for all
original chassis related controls, instrumentation,
switches and other features. This includes items
such as cruise control, climate controls, gauges,
wipers, lights, front seats and three-point safety
belts, etc.
FRONT SEATS
The driver and co-pilot seats may be
independently adjusted to suit individual
preference.
See your chassis owner’s manual for
instructions on seat adjustments.
FOLDING DINETTE SEAT
If your model has a dinette seat located
directly behind the driver or passenger front seat,
the dinette seat back is hinged and can be folded
down to allow full use of the front seat reclining
feature. Simply remove the seat back cushion and
unlatch the bolt latches on both sides of the
dinette seat as shown, then fold downward.
SEAT BELTS
Seats intended for occupancy while the
vehicle is in motion are equipped with seat belts
for the protection of the driver and passengers.
Lap Belts
The lap belts must be worn as low as possible
and fit snugly across the hip area. Always sit
erect and well back into the seat. To gain full
protection of the safety belt, never let more than
one person use the same safety belt at any one
time, and do not let the safety belts become
damaged by pinching them in the doors or in the
seat mechanism. After any serious accident, any
seat belts which were in use at the time should be
replaced.
Dinette Seatback Latch
(Remove cushion and unbolt to fold down)
Dinette seat folds down to allow front seat
reclining.