Page
14
of
15
When the desired lifting height has been reached, the air hose
is taken out of the valve on the cushion
with the compressor
still running.
This closes the valve.
Afterwards
the compressor
is turned off.
NB: Thanks to the internal grid system, the CareCube Cushion
is stable, even if only partially inflated. This means that you
may chose only to lift the patient’s leg e.g. 20 cm, if this gives
the ideal height for treatment and/or the highest patient
comfort.
17.
Deflating the CareCube Cushion with the compressor
Follow these steps in order to deflate the CareCube Cushion:
1.
Insert the power cable into the socket.
2.
Insert the air hose in the mounting on the compressor, marked with the word “IN”
and a red dot.
3.
Insert the air hose into the valve on the CareCube Cushion.
4.
Turn on the compressor, using the switch
5.
The CareCube Cushion is now deflated. After approx. 20 seconds, the cushion is
completely empty
6.
Take the air hose out of the valve on the cushion
with the compressor still running.
This closes the valve.
Afterwards
the compressor is turned off.