19
3) Place the head-half of the base on the cross brace and slot it into the foot-half.
4) Tighten the rondo screws
5) Connect the variable height jack, leg rest jack (depending
on option) and plug into the mains
7.2. Dismantling
1) Brake the wheels and place the bed base in low position
.
2) Unplug from the mains and disconnect the variable height jack and leg rest jack (depending on
option). (See stage instructions for dismantling the motors)
3) Loosen the two Rondo screws
connecting the two halves of the bed base by 1cm and remove the
clip.
4) Remove the head-half of the
bed base.
5) Remove the clips
and the foot-half of the bed base.
3
