Winmate I881, Руководство пользователя

Страница: 103 / 106

Rugged Computing
Users Manual Rugged Table PCs 103
G. LAN Problem
Condition Check Point
I cannot access the network.

Make sure that the LAN cable is properly
connected to the RJ-45 connector and the
network hub.

Make sure that the network configuration is
appropriate.

Make sure that the user name or password is
correct.
H. Power Management Problems
Condition Check Point
The tablet PC does not enter
Standby or Hibernation mode
automatically.

If you have a connection to another computer,
the tablet PC does not enter Standby or
Hibernation mode if the connection is actively in
use.

Make sure that the Standby or Hibernation
time-out is enabled.
The tablet PC does not enter
Standby or Hibernation mode
immediately.

If the tablet PC is performing an operation, it
normally waits for the operation to finish.
The tablet PC does not
resume from Standby or
Hibernation mode.

The tablet PC automatically enters Standby or
Hibernation mode when the battery pack is
empty.

Do any one of the following:
- Connect the AC adapter to the tablet PC.
- Replace the empty battery pack with a fully
charged one.
I. Startup Problems
Condition Check Point
When you turn on the tablet
PC, it does not respond and
the Power indicator does not
light green.

If you are using an external AC power, make
sure that the AC adapter is correctly and
securely connected. If so, make sure that the
electrical outlet works properly.

If you are using the battery power, make sure
that the battery is not discharged.

When the tablet PC is connected to AC power
and hard disk drive temperature is below 5 oC,
the optional heater would turn on as indicated by