50
IP65 Stainless B Series Panel PC User Manual
4.2.7 Using Recovery Wizard to Restore Computer
The Panel PC has a dedicate recovery partition stored on the hard drive of the PC to enable
quick one-key recovery process. This partition occupies about 11GB of the storage space,
and comes built-in to the PC.
Note:
Before starting the recovery process, make sure to backup
all user data. The data will be lost after the recovery process.
To enable quick one-key recovery procedure:
Plug-in the AC adapter to Bay Trail series computer. Make sure the computer stays
plugged in to power source during the recovery process.
Turn on the computer, and when the boot screen shows up, press the
F6
to initiate
the Recovery Wizard.
The following screen shows the Recovery Wizard. Click
Recovery
button to
continue.
A warning message about data loss will show up. Make sure the data is backed up before
recovery, and click
Yes
to continue.
Wait the recovery process to complete. During the recovery process, a command prompt will
show up to indicate the percent of recovery process complete. The system will restart
automatically after recovery completed.
