Winkhaus HF.MD.PADM.01., Оригинальное руководство пользователя

Страница: 27 / 69

HF.MD.PADM.01. HF.MD.PADM.01. 99.827.26 1.0/09/16 99.827.26 1.0/09/16
26/32 27/32
English English
Basic Settings
Window
hinge on the right
(drive left-hand mounted)
Unlocking direction
Turning key lights
(factory setting)
=
Window
hinge on the left
(drive right-hand mounted)
Turning key does not light
=
Info key lights
(factory setting)
Info key does not light
=
=
Key illumination
switched on
Key illumination
switched off
The condition of the drive is
permanently displayed by
lighting of the corresponding
buttons.
The key Illumination turns off
automatically after 20 seconds.
>
5
Sec.
The configuration mode for
setting the basic functions can be
started by pressing
(> 5 Sec.) the
programming button. Press the
relevant button to change the
setting.
Exit the configuration mode by
pressing the programming
button again.
Attention:
By pressing (> 10 Sec.) the
programming button will restore
the
factory default settings
and delete all programmings.
Parallel opening button lights
CLOSE-button lights
Parallel opening button does not light
(factory setting)
CLOSE-button does not light
(factory setting)
=
=
=
=
Control panel
locked
Parental Controls
turned on
Control panel
unlocked
Parental Controls
turned off
The control elements and
the key illumination are
deactivated.
To open the window in turning
position, the keys
must be pressed simultaneously
for 5 sec. When the turning
position key is pressed for 1 sec,
are flashing 3 times.
>
5
Sec.
1x
briefly
Teach mode
is finished
Leave teach mode:
Pairing EnOcean button
Start teach mode:
The selected settings are automatically saved after 180 seconds.
The basic settings can be changed by pressing the keys on the
drive in the teach mode (see page 26).
Connect button: Delete button:
Remove all allocations:
3x
3x
successively 3x OPEN...CLOSE
(OPEN...CLOSE...OPEN...CLOSE...OPEN...CLOSE)
5
Sec.
5
Sec.
5
Sec.
5
Sec.
Careful!