If there is no magnet, it must be attached
in order to restore the function.
If there is a magnet, please verify whether
the magnet is in its correct position on the
sensor surface and whether the distance
between the radio contact and the magnet
is o.k. (must not exceed 5 mm). Should the
distance be too big, you can improve the
position of the magnet by means of the
adjustment screws of the fitting system. If
this is not successful, restart positioning
the sensor and the magnet (When
adjusting the window fitting, please
observe the maintenance and adjustment
instructions
of
the
window
fittings
manufacturer in question.)
8. Declaration of conformity
This product complies
with
the
basic
requirements
and
instructions of the R&TTE
guideline 1999/5/EG.
You can download the declaration of
conformity in the download section on the
internet at www.winkhaus.de.
9. Disposal information
FM wireless contacts include
elements treated as electronic
waste and thus must not be
disposed of with the normal
household waste. The housing
is made of recyclable plastic material.
When disposing of waste, please observe
the locally-valid rules and laws.
10.
All rights reserved
The following information and illustrations
reflect
the
current
state
of
our
development and manufacturing of this
product. In order to achieve customer
satisfaction and reliability of the wireless
contacts we reserve the right to change
the product. Any information given in this
document has been compiled and verified
with the greatest care. Due to the constant
technical progress, changes in legislation
and other inevitable changes, we cannot
accept any responsibility for the accuracy
and completeness of the contents. We are
always thankful for suggestions and
comments.
11.
Copyright
© Aug. Winkhaus GmbH & Co. KG, all
rights and modifications reserved
Current version:
FT - 09/2017
www.winkhaus.de
