If the sash overlap height is bigger than 19
mm (which is frequently the case with
PVC-U and timber windows), the magnet
and the wireless contact should be
mounted in a way that the magnet is
positioned in front of the wireless contact
(first illustration).
If the sash overlap is smaller than 19 mm
(which is frequently the case with
aluminium windows), the magnet and the
radio contact should be positioned one
below the other (third illustration).
During installation please make sure to
locate the magnet in front of or below the
contact surface (line mark below the
sensor, see illustration) of the radio
contact.
For fixing the magnet please use the
attached adhesive pads. Attach one pad
beneath the smooth surface of the
magnet. Then fix the magnet to the
mounting position on the window.
For fixing the FM.A radio contact use the
two large adhesive pads. Stick them
beneath the ground of the radio contact
FM.A. After that fix the wireless contact
FM.A to the mounting position on the
window.
Step 6: Functional test
After the installation we recommend you to
perform a functions test. Open the window
and verify whether the smart home system
or the subsequent component responds to
the opening of the window. If there is no
response, use the section 7 (possible
sources of error) of these instructions to
solve the problem.
19-25
22
10-19
26
Contact
surface
