Winkhaus blueMatic EAV, Инструкция по установке, эксплуатации и обслуживанию

Страница: 8 / 92

blueMatic EAV 5044744 8 Installation, Operating and
Maintenance Instructions
1
EN
Aug. Winkhaus GmbH & Co. KG
∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
The locking systems are not designed to absorb or compensate for any
movement changes or in the closing mechanism of the door caused by
changes in temperature or in the structure of the building.
Doors which are used in damp rooms and in environments with aggressive
corrosion related air conditions require special door furniture.
The locking systems are incorrectly used – that is used contrary to the terms de-
scribed above – in evident in particular, if:
• the instructions on the intended use are not being followed;
• the problem-free operation is hindered due to the installation of external
objects and / or objects that are not purpose-conformant in the opening
zone, the locking system or within the keeps;
• the locking system or the center keep is manipulated in such a way that its
design, mode of operation or function is changed;
• the door is drilled through in the area of the lock housings or of the lock rod
once the lock has been installed;
• the dead bolt projection or other locking components are employed
contrary to their intended purpose, as a means to hold the door opened or
attempts are made with excluded locking element to close the door element;
• the handle’s pin is driven through the spindle with force;
• the locking elements are wrongly installed or are tampered with, e.g. by
overpainting movable parts like the latch bolt;
• loads exceeding those of normal manual force are transmitted via the safety
key onto the lock system;
• perform a manual or mechanical locking or unlocking during the motor is
working;
• the handle is turned counterclockwise or if a force greater than 150 N is
exerted on the handle;
• the clearance between the door frame and sash is increased or decreased,
which would for instance result from readjusting the hinge plates or from
lowering the door;
• if auxiliary lifting tools or other tools are used to open or close the lock;
• the handle and key are used at the same time;
• the lock is locked / unlocked by using improper objects;
• the size of the door opening deviates from the specifications prescribed.
1.3 Use contrary to the intended purpose