User Manual of Network Camera
73
2.
Check
Enable Video Tampering
checkbox to enable the video tampering
detection.
3.
Set the video tampering area; refer to
Task 1
Set the Motion Detection Area
in
Section 6.6.1.
4.
Click
Edit
to edit the arming schedule for video tampering. The arming schedule
configuration is the same as the setting of the arming schedule for motion detection.
Refer to
Task 2
Set the Arming Schedule for Motion Detection
in
Section 6.6.1.
5.
Check the checkbox to select the linkage method taken for the video tampering.
Audible warning, notify surveillance center, send email and trigger alarm output are
selectable. Please refer to
Task 3
Set the Alarm Actions for Motion Detection
in
Section 6.6.1.
6.
Click
Save
to save the settings.
6.6.3
Configuring Alarm Input
Steps:
1.
Enter the Alarm Input Settings interface:
Configuration > Advanced Configuration> Events > Alarm Input:
2.
Choose the alarm input No. and the Alarm Type. The alarm type can be NO
(Normally Open) and NC (Normally Closed). Edit the name to set a name for the
alarm input (optional).
