User Manual of Network Camera
74
Figure 6-45
Alarm Input Settings
3.
Click
Edit
to set the arming schedule for the alarm input. Refer to
Task 2
Set the
Arming Schedule for Motion Detection
in
Section 5.6.1.
4.
Check the checkbox to select the linkage method taken for the alarm input. Refer
to
Task 3
Set the Alarm Actions for Motion Detection
in
Section 5.6.1.
5.
You can also choose the PTZ linking for the alarm input if your camera is
installed with a pan/tilt unit. Check the relative checkbox and select the No. to
enable Preset Calling, Patrol Calling or Pattern Calling.
6.
You can copy your settings to other alarm inputs.
7.
Click
Save
to save the settings.
6.6.4
Configuring Alarm Output
Steps:
1.
Enter the Alarm Output Settings interface:
Configuration>Advanced Configuration> Events > Alarm Output
2.
Select one alarm output channel in the
Alarm Output
drop-down list. You can
