Page 6
TimelapseCam User Guide
Page 15
TimelapseCam User Guide
System Requirements
OS:
Microsoft® Windows® XP with Service Pack 2 or Service Pack 3
(recommended); Windows Vista® Home Premium, Business,
Ultimate, or Enterprise with Service Pack 1; or Windows 7
Hard disk space:
100MB or above
CPU:
Intel® Pentium® 4 or AMD Athlon® 64 processor or above
Memory:
1GB of RAM
Specifications
Operational Mode
Time Lapse
Resolution
8.0 MP
Still Resolutions
JPEG
Low 640 x 480, Medium 1600 x 1200, High 2592 x 1944,
Enhanced 3264 x 2448
Image Output
USB OUT, SD Card
Housing
Weather-resistant and lockable
Display
LCD
SD Memory Card
Up to 32 GB SD card (not included)
Format
JPEG
USB Output
Requires PC / MS Windows XP / Vista / 7
Picture Delay
Variable 10 sec, 30 sec; 1, 5, 10, 15, 30 mins; 1, 2, 3, 6, 12 hrs
Standby Time
300 Days
Run Time
180 days
Focus
6” - Infinity
Infrared Sensor
Passive
Easy Read Bar
Moon Phase / Camera Name / Date / Time
Power Supply
6 C-Cell Alkaline batteries (not included)
External Power port
12V
Size
6.9” x 5.4” x 2.8”
Downloading & Viewing Images
There are a number of ways for you download and view
pictures and videos in the field or at another location.
Important
Make sure that the camera is in the OFF position
before removing SD card.
Removing the SD Card
To remove the SD Memory Card, open the camera cover
and push gently on the SD card and it will pop out slightly
allowing you to remove it. Load the SD card into the
player or card reader to view or move stored images to
another location.
ln the Field
You can download the pictures and videos with the aid
of external devices. To download, use an external player
or card reader that is supported by a Mini USB Jack.
At Home
Remove the entire camera and transport to another location to download images. To connect
the camera to a PC computer, turn the camera ON, press the OK button once to change to
SETUP Mode. Connect the USB cord (not included) between the USB out port and the PC
computer. The computer will recognize the camera as a removable drive. The unit works
with Windows XP/Vista/7. Copy the images and videos from the camera onto your PC for
further editing or printing. When the USB cable is disconnected, the camera will go back
to SETUP mode.
See the full line of Wingscapes camera accessories at
www.wingscapes.com
