Winget Crocker RP1500XD, Инструкция по эксплуатации и частям

Страница: 9 / 122

ELECTRICAL SERVICES
Refer to wiring diagram in Ops Manual. All wiring to be undertaken by competent
electrician.
NOTE: electrical cables particularly those with copper conductors suffer from a
condition known as ‘relaxation’ which may cause wiring to work loose over a period of
time, it is recommended that the tightness of wiring connections and terminals are checked
following the first month in service.
4.1 Refer to pneumatic circuit diagram in Ops Manual. Connect compressor. Supply
compressed air 5.5 bars as required (80psi).
4.2 Refer to wiring diagram in Ops Manual when connecting air control valves.
4.3 Remove transit bar and ring from door BEFORE starting mixer.
4.4 Ensure starters are mounted away from mixer on supports free of vibration.
4.5 Ensure starters are fitted with correct overloads – see technical specification power
units.
OPERATION
5.1 Correct oil level, Gearboxes and Air line lubricator.
5.2 Mixing pan clear of loose nuts and bolts to prevent damage to fingers and blades.
5.3 Check correct rotation – mixing star – anti clockwise; mixing pan – anti clockwise.
All when viewed from the top.
5.4 Discharge door and blade correct operation.
5.5 Blade operating clearances adjust in line with maintenance instructions.
5.6 Never exceed manufacturer’s maximum capacity as detailed in specification.
SHUTDOWN
6.1 Prior to any work being carried out mixer to be isolated and physically locked off.
Recommended equipment double key exchange system.
6.2 Follow procedure detailed in company and users’ Health and Safety Policy at
all times.
6.3 Ensure all storage bins containing materials to be mixed are isolated.