Winget Crocker RP1500XD, Инструкция по эксплуатации и частям

Страница: 8 / 122

RP1
500
XD
OPERATIONAL AND SAFETY
REQUIREMENTS
PRE-DELIVERY INSPECTION (Also see separate Document)
1.1 Drive coupling alignments, pan and star meshing of pan rack and drive gear.
1.2 Operating clearances star blade to pan. Fixed blade to pan wall.
1.3 Discharge blade to pan base.
1.4 Rollers to register ring.
1.5 Correct oil level in gearboxes. All grease points charged. Gear teeth greased.
1.6 Air system tested.
1.7 Door operation and seating.
1.8 No load test. Correct rotations.
PRE INSTALLATION
2.1 Check consignment.
2.2 Offload equipment using certified lifting gear of suitable capacity, by a competent
person (see separate chart for nett weight).
INSTALLATION
3.1
Refer to contract arrangement and site instructions.
3.2 Mixer to be mounted on supports of adequate strength and rigidity to prevent undue
vibration when mixing and securely bolted.
3.3 Mixer frame to be level on structure, add packers as required.
3.4 Check that pan is correctly seated on Rollers and that pan rack and drive gear are in
correct mesh.
3.5 Check locating rollers to register ring.
3.6 Check operating clearances star blade to pan. Fixed blade to pan wall. Discharge
blade to pan base. See maintenance section Ops Manual.