Winget Crocker RP1500XD, Инструкция по эксплуатации и частям

Страница: 30 / 122

MAINTENANCE AND LUBRICATION
DAILY: Using Total Multis EP2 grease (or equivalent) and grease the following
points:-
Pan Roller Spindles 3 Points
Pan Locating Rollers 4 Points
Discharge Blade Lifting Gear Brackets 2 Points
Air Cylinder Lever Pivot Holder 1 Point
Mixing Blade Finger Bearings 3 Points
Fixed Blade Finger Bearing 1 Point
Loading Hopper Rollers 2 Points
Inspect and top-up if necessary:-
Air Line Lubricator Use Total Azolla 27 (or equivalent)
Or suitable Pneumatic Tool Oil
WEEKLY: Inspect and top up if necessary:-
(1) Star Drive Gearbox Use Total Carter EP320 (or equivalent)
(2) Pan Drive Gear Box Use Total Carter EP320 (or equivalent)
(3) Loader Winch Gearbox (Flender) Use Total Carter EP220 (or equivalent)
Inspect and Adjust
(1) Pan Gear and Pinion – Apply Open Gear Lubricant (or equivalent) as required.
(2) Adjust Star Blades, Fixed Blades and Discharge Blade to the following settings, also
make sure that Blade fingers are free in their bearings and that the springs are clear of
obstructions.
Mixing Blade: (3 mm) clear of pan base. Adjust by moving the blade down
its finger.
Discharge Blade: Just touching pan base when finger bridge is resting on stop
sleeves. Adjust by moving bridge up or down fingers.
Fixed Blade: (3 mm) clear of pan base and just touching pan rim. Adjust
by moving hinge brackets along its slots and blade up or
down its fingers. Re-set spring to 100 mm overall length
after setting blade.
(3) After the first week’s running the Whirler Vee Belt Drive will need adjustment to take
up initial wear/stretch. At the correct tension it should be just possible to twist each
belt through 90
o
when gripped between finger and thumb midway between pulleys.