WinGD RT-flex50DF, Руководство по обслуживанию, Страница: 456 / 586

Maintenance
6606 − 2/A1
Winterthur Gas & Diesel Ltd.
6/ 9
37) Remove the manual ratchet (H1,
Fig. 9 ).
38) Remove the lifting plate (94663 − IL).
39) Operate the engine room crane to
move and lower the SAC to an
applicable area.
40) Remove the lifting plate (94663 − IL),
swivel lugs (94048 − M30), wire rope
sling (94666) and eye bolt
(94040 − M30).
3. Installation
1) Make sure that all the surfaces of the
SAC and the related surfaces in the
receiver are clean and have no
damage.
2) Apply a layer of silicon compound to
each side of the SAC and the related
surfaces in the receiver housing.
3) Attach the swivel lugs (94048 − M30,
Fig. 10 ), and the eye bolts
(94040 − M30) to the SAC.
4) Make sure that the supports
(94663A − IL, 94663B − IL) are installed
to the left and right side of receiver
frame.
5) Attach the wire rope sling (94666) to
the swivel lugs (94048 − M30).
6) Attach the hook (1, Fig. 11 ) of the
engine room crane to the wire rope
sling (94666).
7) Operate the engine room crane to lift
the SAC to the position shown.
8) Attach the lifting plate (94663 − IL) to the
bottom swivel lugs (94048 − M30).
Scavenge Air Cooler: Removal and Installation 7 Cyl.
2016
94663 − IL
Fig. 9
H1
Fig. 10
94666
94048 − M30
94040 − M30
94040 − M30
94048 − M30
94663 − IL
H1
94666
Fig. 11
94663A/B