WinGD RT-flex50DF, Руководство по обслуживанию, Страница: 441 / 586

Maintenance
6606 − 1/A1
Winterthur Gas & Diesel Ltd.
3/ 7
18) Operate the engine room crane to
carefully pull out the SAC ( Fig. 4 ).
19) Attach the swivel lugs (94048 − M16, ) to
the rear of the SAC (1).
20) Attach the chain (94666I) to the two
swivel lugs (94048 − M16) on the rear of
the SAC (1).
21) Attach the manual ratchet (H2) to the
chain (94666I).
22) Operate the manual ratchet (H2) to lift
the SAC a small distance.
WARNING
Injury Hazard: The mass of
the SAC is approximately
1142 kg. To prevent injury,
be careful when you move
the SAC.
23) Operate the manual ratchet (H2) and
the engine room crane until the rear of
the SAC is fully on the supports
(94663A, 94663B) (view
II, i.e the SAC
is moved 70 mm in front of guide end of
the left and right supports (94663A,
94663B)).
24) Operate the engine room crane and the
manual ratchet (H2) to hold the full
weight of the cooler.
25) Remove the two lugs (94663C), the
safety chains (94663D) and the left and
the right supports (94663A/ B).
Scavenge Air Cooler: Removal and Installation
2016
Fig. 4
H2 Engine Room
Crane
I
II
WCH03084
I
94663C
94663D
94048 − M16
94666I
II
1
70 mm