WinFast NF4K8AB Скачать руководство пользователя

Страница: 44 / 75

Chapter 3 BIOS Description

NF4K8AB Series User Manual

Integrated Peripherals

Integrated Peripherals Menu

IDE Function Setup

Press <Enter> to set the items about IDE function. Please refer to page 37.

RAID Config

Press <Enter> to set RAID Config. Please refer to page 38.

Onchip USB (Default: V1.1+V2.0)

This item is used to enable or disable the onboard USB controller.

Selecting V1.1+V2.0 enables the system to support both USB 1.1 and USB

2.0 specification.

USB Keyboard/Mouse Support (Default: Disabled)

These items are used to set whether the USB keyboard/mouse controller is en-
abled in a legacy operating system (such as DOS).

AC97 Audio (Default: Auto)

This option is used to set whether onboard AC97 Audio is enabled. Dis-

abled the controller if you want to use other controller cards to connect an

audio device.

MC97 Modem (Default: Auto)

This item is used to set whether onboard MC97 modem is enabled.

MAC Lan (Default: Auto)

Setting to Auto allows the BIOS to auto-detect the NVIDIA LAN controller and

enable it.

Onboard 1394 Controller (Default: Enabled)

This item allows you to enable or disable the onboard IEEE 1394 controller.

Содержание NF4K8AB












































































Результаты поиска

Содержание NF4K8AB

Отзывы:

Похожие инструкции для NF4K8AB

Бренды по названию

Популярные бренды

WinFast NF4K8AB, Руководство пользователя

Результаты поиска

Содержание NF4K8AB

Отзывы:

Похожие инструкции для NF4K8AB

Бренды по названию

Популярные бренды