Quick Start EVK-LILY-W1
Download the latest EVK-LILY-W1 documentation
from www.u-blox.com/evk-downloads.
1. Build and install the Linux drivers and
configuration tools as per the User Guide.
2. Select SDIO or USB interface through jumper
settings. The I/O voltage is set to 3.3 V by
default.
a. For SDIO (
2a
): Bridge J2 7=8 and J3 5=6
b. For USB (
2b
): Bridge J2 5=6 and J3 7=8
3. For EVK-LILY-W131: Connect one antenna
with U.FL connector to the antenna
connector J6 (
3
).
4. Connect the EVB (
1
) to the host either by:
a. Inserting the EVB with the SD card connec-
tor (
4a
) into an SDIO capable slot or
b. Connecting a USB cable from the host to
the micro-B connector J7 (
4b
) on the EVB.
5. Power LED (
5
) is green.
UBX-15031003 - R01
1. Overview
2. Setup
1 (EVB)
4b (Micro-USB)
4a (SD card
connector)
5 (Power LED)
2a (SDIO)
2b (USB)
3 (U.FL antenna connector J6
- For EVK-LILY-W131 only)
