WinFast NF4K8AB Скачать руководство пользователя

Страница: 24 / 75

Chapter 2 Installation Instructions

NF4K8AB Series User Manual

1394 Port (optional)

This digital interface supports electronic devices such as digital cameras,

scanners, and printers.

USB 2.0 Ports

These four Universal Serial Bus (USB) ports are available for connecting USB 2.

0/1.1 devices.

LAN Port (-L/-K)(optional)

This port allows connection to a Local Area Network (LAN) through a network

hub.

Rear, Line in/Side, Line out/Front, Microphone, CEN/LFE

When using a 2-channel sound source, the Line out jack is used to connect to

speaker or headphone; the Line in jack connects to an external CD player, tape

player or other audio device. The Microphone jack is used to connect to the

microphone.

When using a 6-channel sound source, connect the front speaker to the green

audio output; connect the surround sound speaker to the black audio output;

connect the center speaker/subwoofer to the yellow audio output.

When using a 8-channel sound source, connect the front speaker to the green

audio output; connect the rear sound speaker to the black audio output; connect

the center speaker/subwoofer to the yellow audio output; connect the side sound

speaker to the blue audio output.

Line in, Line out, Microphone Jacks (for -6 models)

When using a 2-channel sound source, the Line out jack is used to connect to

speaker or headphone; the Line in jack connects to an external CD player, tape

player or other audio device. The Microphone jack is used to connect to the

microphone.

When using a 6-channel sound source, connect the front speaker to the green

audio output; connect the surround sound speaker to the blue audio output;

connect the center speaker/subwoofer to the red Microphone output.

Содержание NF4K8AB












































































Результаты поиска

Содержание NF4K8AB

Отзывы:

Похожие инструкции для NF4K8AB

Бренды по названию

Популярные бренды

WinFast NF4K8AB, Руководство пользователя

Результаты поиска

Содержание NF4K8AB

Отзывы:

Похожие инструкции для NF4K8AB

Бренды по названию

Популярные бренды