Version
2
01.03.2017
11
3.2
Setting the temperature
-
Press button
one second until the targeted temperature is blinking.
-
Use button
to increase the temperature or
-
Use button
to lower the temperature.
-
When the right temperature is set, press again on button
to confirm
Explanations of the main display symbols
Red light
= cooling engaged (compressor)
Red light
= fan high speed
Red light
= heating engaged
Red light
and message « DF » on display = defrost engaged
3.3
Standby mode
-
Standby mode: maintain a 3 seconds pressure on button 1. The compressor
stops.
-
The thermostat indicates « OFF » and also the cellar temperature.
-
To come back, maintain again a 3 seconds pressure on button 1.
-
The thermostat indicates « ON » during 1 second.
3.4
Automatic defrost
The thermostats of models C50S and C50S will run an automatic defrost time several times a day.
During this operation, the compressor is stopped, only the fan is functioning at low speed. The con-
densate water producing during this period will be evacuated through the tube drain. The display
shows « DF » during the defrost time.
