4
Installation
4.1
Delivery, insurance and acceptance
4.1.1
Delivery
The door frame including the door is placed on a pallet and strapped with bands.
Depending on the scope of supply, the components are premounted on the door frame or
are delivered separately.
4.1.2
Insurance
The responsibilities of transport and insurance are stated in the sales order confirmation
and in the general conditions of sale of WINEL BV.
4.1.3
Acceptance
During acceptance of the delivery, WINEL BV recommends to proceed as follows:
Procedure
1. WINEL BV recommends to have an authorized official of the transportation company
present during this procedure.
2. Check if the packing and all the pallets and/or boxes are undamaged and if all parts
are present.
a) Compare the labels with the WINEL BV packing list and the order confirmation.
b) If there is damage or if parts are missing, immediately report this to the sales
department of WINEL BV.
4.2
Recommendations for handling and unpacking
General
• Use a fork lift or a hoist to transport the pallets or the boxes as closely to the
installation site as possible.
• Do not use hooks or other tools that may penetrate the packing and cause damage to
the packed items.
• Only use lifting equipment with adequate capacity for the load.
For the weights and dimensions of the delivery, refer to the General Arrangement
drawings enclosed.
• Only unpack the parts in the cardboard boxes just before you install them. This
prevents parts from being lost.
• Use a sharp knife to open the cardboard boxes but take care not to cause damage to
the parts inside the boxes.
Door assembly (door frame with door and components)
Danger:
• The door assembly is heavy.
• Use correct and certified lifting materials.
• Only authorized personnel are allowed to operate the lifting equipment.
• Follow the appropriate safety procedures.
Installation
8
19 - 001 - 29.05.2020
