6.2.2
Adjust the hinges
Note:
If the door has two cleats on the hinge side, do not adjust the hinges.
Procedure
1. On all hinges, remove the plastic
caps (B).
2. On all hinges, turn the socket screws
(A) a ¼ turn.
a) Clockwise to increase the hinge
force.
b) Counterclockwise to decrease
the hinge force.
3. Repeat the previous step as many
times as necessary.
4. Install the plastic caps on all hinges.
6.2.3
Adjust the cleats
Note: The rubber gasket must be compressed 3-4 mm to make the door
watertight.
Procedure
1. On all cleats, turn the hexagonal nut
(A) a quarter of a turn.
a) Clockwise to increase the
compression of the rubber
gasket.
b) Counterclockwise to decrease
the compression of the rubber
gasket.
2. Repeat the previous step until the
compression of the rubber gasket s
correct for all cleats.
6.2.4
Replace the hinge bushes
Warning:
RISK OF INJURY - HEAVY OBJECT
• Use correct and certified lifting materials.
• Do this task with two persons
A
B
-
-
+
A
Maintenance
14
19 - 001 - 29.05.2020
