WINDSY Wallbox Home 11 kW, Руководство по эксплуатации

Страница: 11 / 31

Windsy Wallbox Home 11 kW
4.2. norms and standards
4.3. charge mode
4.4. charging port
operation manual
Page 11 of 31
Valid from: 03-28.03.2022
EV-I-1000025-01
Figure 2: Dimensions of the Windsy Wallbox Home 11kW
Figure 3: Schematic representation of the connection of the wall box to the electric vehicle
1(3.1.9; 6.2.3). This is a method in which the AC charging device is continuously connected to the
utility grid.
The Windsy Wallbox 11 kW charging station complies with the following IEC standards:
Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability
requirements for ac pin and contact-tube accessories
- IEC 61851-1:2017, Electric vehicle conductive charging system - Part 1: General
- IEC 60364-7-722:2018, Low-voltage electrical installations - Part 7-722: Requirements
requirements
According to IEC 61851-1 (3.1.12), the Windsy Wallbox 11 kW charging station corresponds to the
"Case C" connection, in which the charging cable is firmly connected to the charging station and is
routed to the electric vehicle via a plug, see Figure 3.
for special installations or locations - supplies for electric vehicles
The Windsy Wallbox 11 kW charging station corresponds to charging mode 3 according to IEC-61851-
- IEC 62196-2:2016, Plugs, socket outlets, vehicle connectors and vehicle inlets -
Machine Translated by Google