Windsor COMMODORE CMD, Инструкция по эксплуатации

Страница: 19 / 19

COMMODORE
COMMODORE
PROBLEM
No electrical power.
Loss
solution recovery.
No
forward movement
of
machine.
No solution flow.
Solution will not
off.
cleaning.
CAUSE
Dead electrical circuit.
Faulty
main
power switch
on
machine.
Faulty power cord.
Fuse blown
or
circuit breaker tripped
(on
machine).
Vacuum lever
in
"off" position.
Faulty motor switch.
Worn
motor brushes
or
faulty
motor.
Crack in recovery dome.
Obstruction or damage in shoe linkage
or hose.
Incorrectly installed
or
adjusted shoe.
Loose wires at switch or connections.
Faulty drive motor switch.
Worn carbon brushes in gear drive motor
or faulty motor.
Fuse blown or circuit breaker tripped
(on
machine).
Faulty speed control potentiometer.
Faulty pump.
Faulty switch.
"Clogged" or faulty solenoid.
Obstruction in jets.
Faulty switch.
in solenoid valve or faulty valve.
One
or
more jets plugged.
SO
N
Check building circuit breaker or fuse box.
Replace switch.
Repair
or
replace power cord,
fuse or
reset
breaker
after
problem.
Put
lever
in "on"
position.
Replace switch.
Replace motor brushes
or
motor.
Repair or replace.
Remove obstruction, repair or replace
casting.
Adjust shoe.
Repair as required.
Replace switch.
Replace fuse or reset breaker after
correcting problem.
Replace control.
Replace pump.
Replace switch.
Remove obstruction
or
replace.
Remove and clean jets.
Replace switch.
Remove obstruction or replace valve.
Clean jets.
19