Windsor 10086130, Руководство по эксплуатации, Страница: 21 / 136

MACHINE OPERATION
86292490 VOYAGER DUO 08/20/07
3-13
TO BEGIN SCRUBBING
When operating the machine around people, pay
close attention for unexpected movement. Use
extra caution around children.
1.
Turn machine power on.
2. Position rotary switch to the position matching
the process to be preformed, and the chemical
that was added to the solution tank or chemical
tank (Deluxe), either interim or interim/pre-spray
(Deluxe) or extraction cleaning.
3. Check position of reverse button and the
position speed control knob so that the machine
is set to travel in the direction and the speed
intended.
4. Drive machine forward to begin scrubbing.
TO STOP SCRUBBING
1.
While scrubbing turn off the pump switch to stop
spraying solution. Continue to scrub and
recover the solution for an additional pass.
2. Allow the throttle switches to return to neutral.
3. Rotate the selector switch to the accessory
position so that the vacuum motor continues to
run and evacuate the system. This will also
raise the deck and vacuum shoes.
4. Turn the rotary switch to the off position by
rotating the selector switch clockwise. Turn
machine power off.
DELUXE
1.
While scrubbing turn off the pump switch to stop
spraying solution. Continue to scrub and
recover the solution for an additional pass.
2. Allow the throttle switches to return to neutral.
3. Rotate the selector switch to the accessory
position so that the vacuum motor continues to
run and evacuate the system. This will also
raise the deck and vacuum shoes.
4. Turn the rotary switch to the off position by
rotating the selector switch clockwise. Turn
machine power off.
FOR SAFETY: Before leaving or servicing
machine: stop on level surface, turn off machine
and remove key.
FOR SAFETY: When using machine, go slow on
inclines and slippery services.