background image

5

Safety

Important Safety Instructions

When using this machine, basic precaution

must always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.

To reduce the risk of fire, electric shock, or injury:

Use only

 indoors. Do not use outdoors or expose to rain.

Use only

 as described in this manual. Use only manufacturer’s recommended components and attachments.

If the machine is 

not working properly

, has been dropped, damaged, left outdoors, or dropped into water, return it 

to an authorized service center.

Do not

 operate the machine with any openings blocked. Keep openings free of debris that may reduce airflow.

This machine 

is not

 suitable for picking up hazardous dust.

Machine can cause a fire

 when operating near flammable vapors or materials. Do not operate this machine near 

flammable fluids, dust or vapors.

This machine is suitable for commercial use, for example in hotels, schools, hospitals, factories, shops and 
offices for more than normal housekeeping purposes.

Maintenance and repairs 

must be done

 by qualified personnel.

If foam or liquid comes out of machine, 

switch off immediately

.

Disconnect

 battery before cleaning or servicing.

Before the machine is discarded, the batteries 

must be removed

 and properly disposed of.

Make sure all warning and caution labels 

are legible and properly attached

 to the machine.

During operation

, attention shall be paid to other persons, especially children.

Before use

 all covers and doors shall be put in the positions specified in the instructions.

When leaving unattended

, secure against unintentional movement.

The machine shall only

 be operated by instructed and authorized persons.

When leaving unattended

, switch off or lock the main power switch to prevent unauthorized use.

Only chemicals recommended

 by the manufacturer shall be used.

This appliance has been designed

 for use with the brushes specified by the manufacturer. The fitting of other 

brushes may affect its safety.

Do not use on surfaces having a gradient exceeding 2% unless the optional parking brake is installed on the 
machine.

READ AND SAVE THESE INSTRUCTIONS

86400370  Manual Operators - EURO 24V Standard

Содержание 10052830




































Отзывы: