30
12.5.2 Local output - configuration
If component are installed in one or more outputs, these outputs are to be configured.
Which item to be configured depends on the type of output
– see description below.
Local output - overview
Overview ’Local output’
Overview ’Local output’
Local output shall be configured in:
Configuration of a local output
(shown for S1 X9.3/4)
1.
Output type: informs the type ‘Binary output’ (is
not
to be
configured)
2.
Output mode
3.
Controlled by motor groups
a) Motor group output function
b) Logic function
c) Status when active
d) Time-out
The appendix contains all the items that can be configured - see
appendix for detailed explanation.
Weather station type
Here is to be selected which type of weather station
–none, WOW or WLA - that is connected.
(The menu “Weather” is only used for input from WCA 3CP input S1X10.2 for wind speed from WLA 340. Input S1X10.2 is also
used in combination with weather station WOW 201/202/204 for wind direction dependent smoke ventilation - see chapter 10.3).
WLA 33x is not considered as a weather station and is connected directly to the input X10.5, see chapter 12.4.3.
Weather - configuration
Overview ’Sensor type’
Overview ’Sensor type’ (selection of type of weather station)
