Wincomm WTP-9C66 Series, Руководство пользователя

Страница: 28 / 67

22
Selects DVMT/FIXED Mode Memory size used by Internal Graphics Device.
IGD – Boot Type
Select the Video Device which will be activated during POST. This has no effect if external graphics present.
LCD Panel Type
Select LCD panel used by Internal Graphics Device by selecting the appropriate setup item.
Panel Scaling
Select the LCD panel scaling option used by the Internal Graphics Device.
GMCH BLC Control
Back Light Control Setting
BIA Control
Spread Spectrum clock
>>Hardware: Spread is controlled by chip;
>>Software: Spread is controlled by BIOS.
TV1 Standard
TV2 Standard
Active LFP
Select the Active LFP Configuration.
No LVDS:VBIOS does not enable LVDS.
INT-LVDS:VBIOS enables LVDS driver by Integrated encoder.
SDV0 LVDS:VBIOS enables LVDS driver by SDV0.
USB Configuration
Legacy USB Support
Allows USB devices to be used in MS-DOS.
EHCI Hand-off
This is a workaround for 0Ses without EHCI hand-off support. The EHCI ownership change should be claimed
by EHCI driver.
USB transfer time-out
The time-out value for Control, Bulk, and Interrupt transfers.
Device reset time-out
USB mass storage device Start Unit command time-out.
Device power-up delay
Maximum time the device will take before it properly reports itself to the HOST Controller.
‘Auto’ uses default value: for a Root port it is 100 ms, for a Hub port the delay is taken from Hub descriptor.
F71869 Super IO Configuration
Serial Port 0 Configuration
Set Parameters of Serial Port 0 (COM A).
Serial Port 1 Configuration
Set Parameters of Serial Port 1 (COM B).
F71869 H/W Monitor
Monitor hardware status
Second Super IO Configuration
Serial Port 1 Configuration