Wincomm WTP-9C66 Series Скачать руководство пользователя страница 23

Страница: 23 / 67

Setting up the System

The following is a summary of the steps in setting up the system for use.

CAUTION: Make sure that power to the system and each of the devices to be connected is switched OFF before

plugging in the connectors.

Make any required external connections such as the keyboard, and mouse.

Plug the appropriate end of the power cord into the power connector of the system. Then plug the other end of
the power cord to an electrical outlet.

Press the power switch of the system to turn on the system’s power.

If necessary, run the BIOS SETUP program to configure the system (see Chapter 3).

Install the software drivers if necessary.

Installing System Software

Recent releases of operating systems from major vendors include setup programs, which load automatically and

guide you through hard disk preparation and operating system installation. The guidelines below will help you

determine the steps necessary to install your operating system on the Panel PC hard drive.

NOTE: Some distributors and system integrators may have already pre-installed system software prior to

shipment of your Panel PC.

Installing software requires an installed HDD. Software can be loaded in the WTP-9C66 Panel PC using any of

below methods:

Method 1: Use the Ethernet

You can use the Ethernet port to download software from the net to the HDD that has been pre-installed in

WTP-9C66

Panel PC

Method 2: Use the COM Port

By connecting another PC to the

WTP-9C66

Panel PC with an appropriate cable, you can use transmission

software to transmit Operation System Software to the HDD that has been pre-installed in the

WTP-9C66

Panel PC.

Method 3: Use a External CD-ROM

In order to boot up system from USB-CD/DVD drive, please connect USB-CD/DVD drive, turn on computer

power, keep on pressing “F11” key, go into BIOS quick boot menu, select “USB-CD ROM”, WAIT FOR 20

SECONDS, then press enter, system OS will boot up from USB-CD/DVD drive directly

Then you can use the external CD-ROM to transmit the software to the HDD that has been pre-installed in the

WTP-9C66

Panel PC

Installing the Drivers

After installing your system software, you will be able to set up the LAN, VGA, Audio and USB functions. All drivers

are stored in a CD disc, which can be found in your accessory pack.

The various drivers and utilities in the disc have their own text files that help users install the drivers and understand

their functions.

Follow the sequence below to install the drivers:

Содержание WTP-9C66 Series



































































Результаты поиска

Содержание WTP-9C66 Series

Отзывы:

Похожие инструкции для WTP-9C66 Series

Бренды по названию

Популярные бренды

Wincomm WTP-9C66 Series, Руководство пользователя

Результаты поиска

Содержание WTP-9C66 Series

Отзывы:

Похожие инструкции для WTP-9C66 Series

Бренды по названию

Популярные бренды