Wincomm WPC-651, Руководство пользователя

Страница: 32 / 66

3-12
Configre SDRAM Timing by SPD
This option provides DIMM plug-and-play support by Serial Presence
Detect (SPD) mechanism via the System Management Bus (SMBus)
interface. You can disable this option to manage the following four SDRAM
timing options by yourself. In addition, SDRAM operating timings may
follow serial presence from EEPROM content by setting this option to
“Enabled”, and all of SDRAM timing options will be not available and
hidden.
DRAM Frequency
PC-100 means the memory bus is running at 100MHz. PC-133 means its bus
is running at 133MHz.
SDRAM CAS# Latency
This option controls the number of SCLKs between the time a read
command is sampled by the SDRAMs and the time the North Bridge, 8601A,
samples correspondent data from the SDRAMs.
Spread Spectrum
This option is for EMI test only.
Memory Hole
This option allows the end user to specify the location of a memory hole for
memory space requirement from ISA-bus cards.
USB Controller
This option will enable on-chip USB function to support USB peripheral