Wincomm WPC-651, Руководство пользователя

Страница: 16 / 66

2-1
p g
This chapter tells you how to set up the system.
2.1 Setting Up the System
The following is a summary of the steps in setting up the system for use.
CAUTION: Make sure that power to the system and each of the devices to be
connected is switched OFF before plugging in the connectors.
1. Make any required external connections such as the display, keyboard, and
mouse.
2. Plug the appropriate end of the power cord into the power connector of
AC-to-DC Adapter and plug the other end-side to DC Power-in connector of
the on the rear of the system. Then plug the other end of the power cord to an
electrical outlet.
3. Press the power switch on the front of the system to turn on the system’s
power.
4. If necessary, run the BIOS SETUP program to configure the system (see
Chapter 3).
5.
Install the software drivers if necessary.