Wincomm WPC-651, Руководство пользователя

Страница: 37 / 66

3-17
adapter cards. These options determine if AMIBIOS should remove an IRQ
from the pool of available IRQs passed to devices that are configurable by
the system BIOS. The available IRQ pool is determined by reading the
ESCD NVRAM. If more IRQs must be removed from the pool, the end user
can use these PCI/PnP Setup to remove the IRQ by assigning the option to
the ISA/EISA setting. All IRQs used by on-board I/O are configured as
PCI/PnP.
3.9 Peripheral Setup
This section describes I/O resources assignment for all of on-board peripheral
devices.
On Board FDC
If user wants to install different add-on super I/O card to connect floppy
drives, set this field to Disabled. Otherwise, set it to Auto to call BIOS to
automatically determine if the floppy controller should be enabled.
On Board Serial Port 1/Port 2
These fields control the resource assignments of two on-board serial
interfaces SIO1 and SIO2. The following lists show current options in On
Board Serial Port 1/ Port 2 :
Auto
Æ
cannot set serial I/O resources by manual operation
Disabled
Æ
indicates on-board COM port function is ineffective
3F8h/COM1
Æ
assign I/O address 3F8h to COM1
2F8h/COM2
Æ
assign I/O address 2F8h to COM2
3E8h/COM3
Æ
assign I/O address 3E8h to COM3
2E8h/COM4
Æ
assign I/O address 2E8h to COM4
Serial Port2 Mode