Winco W10000VE/A Скачать руководство пользователя страница 3

3

REV A

OMP-113

SPECIFICATIONS

GENERATOR

Model     W10000VE/A

Surge 

Watts 

   10,000

Continuous 

Watts 

  9,600

Volts 

     120/240

Amps     80/40

Generator  Manufacturer   

Mecc  Alte  

Generator Model Number  ES20F-160

Part 

Number 

   16346-025 

Rotor Resistance   

 

6.5 Ohms

Stator Resistance   

 

0.124 Ohms

Regulation    AVR

ENGINE

Engine Manufacturer   

Briggs & Stratton

Engine Model Number   

543477

Type 

 

Code 

   0614-G1

Spark Plug Gap   

 

0.030 in

Intake Valve Clearance   

0.007 - 0.0 in

Exhaust Valve Clearance 

0.004 - 0.006 in

Oil Capacity   

 

 

2.4-2.5 qts (78-80 oz)

SAFETY INFORMATION

This engine generator set has been designed and manufactured to 

allow safe, reliable performance. Poor maintenance, improper or 

careless use can result in potentially deadly hazards; from electrical 

shock, exhaust gas asphyxiation, or fire. Please read all safety 

instructions carefully before installation or use. Keep these instructions 

handy for future reference. Take special note and follow all warnings on 

the unit labels and in the manuals.

ANSI SAFETY DEFINITIONS

DANGER:

DANGER indicates an imminently hazardous situation which, if not 

avoided, will result in death or serious injury. This signal word is to be 

limited to the most extreme situations.

WARNING:

WARNING indicates a potentially hazardous situation which, if not 

avoided, could result in death or serious injury.

CAUTION:

CAUTION indicates a potentially hazardous situation which, if not 

avoided, may result in minor or moderate injury. It may also be used to 

alert against unsafe practices.

1. ELECTRICAL SHOCK -

The output voltage present in this equipment can cause fatal electric 

shock. This equipment must be operated by a responsible person.

 

A. Do not allow anyone to operate the generator without proper 

   instruction.

 

B. Guard against electric shock.

 

C. Avoid contact with live terminals or receptacles.

 

D. Use extreme care if operating this unit in rain or snow.

 

E. Use only three-pronged grounded receptacles

 

  and extension cords.

 

F. Be sure the unit is properly grounded to an

 

  external ground rod driven into the earth.

2. FIRE HAZARD - 

Gasoline and other fuels present a hazard of possible explosion and/

or fire.

 

 

A. Do not refuel when the engine is running or hot.

 

B. Keep fuel containers out of reach of children.

 

C. Do not smoke or use open flame near the generator set or fuel 

   tank.

 

D. Keep a fire extinguisher nearby and know its proper use.  

 

  Fire extinguishers rated ABC by NFPA are appropriate.

 

E. Store fuel only in an approved container, and only in a well 

 

  ventilated area.

 

F. Follow local codes for closeness to combustible material.

3. DEADLY EXHAUST GAS - 

Exhaust fumes from any gasoline engine contain carbon monoxide, an 

invisible, odorless and deadly gas that must be mixed with fresh air.

 

A. Operate only in well ventilated areas.

 

B. Never operate indoors including attached garages

 

C. Never operate the unit in such a way as to allow exhaust gases  

 

  to seep back into closed rooms (i.e. through windows, walls, 

 

  floors).

4. NOISE HAZARD - 

Excessive noise is not only tiring, but continual exposure can lead to 

loss of hearing.

 

A. Use hearing protection when working around this equipment for 

 

  long periods of time.

 

B. Keep your neighbors in mind when using this equipment.

5. CLEANLINESS - 

Keep the generator and surrounding area clean.

 

A. Remove all grease, ice, snow or materials that create 

 

  slippery conditions around the unit.

 

B. Remove any rags or other materials that could create a  

 

  potential fire hazard.

 

C. Carefully clean up any gas or oil spills before starting the unit.

Содержание W10000VE/A













Отзывы: