WECA W6810DK
2727 N First Street, San Jose CA 95134
13
Chapter - 4
Operation Modes
The W6810DK operates in two modes, Standalone and Back- To- Back mode.
Standalone Operation:
In this mode of operation the W6810DK the signal input at Transmit input (J7), is
presented to the encoder of the W6810, where it is digitized and output on the PCM input
data transmit pin (J6). This provides a local loop back. Of the PCM, data to the PCM data
input receive pin (PCMR) of the W6810, where it is reconstructed and output at J12
(RX). The following Jumpers are populated in this mode J1 (2.048MHz), J17A and J20
the Dipswitches are set as follows.
J17 = A
0
1
0
0
0
1
0
1
1
1
0
0
1
0
0
1
1
1
0
1
1
0
0
1
