TREASURE HUNTER’S CODE OF ETHICS
A few basic rules you should follow while using your detector
- Always get permission before searching any site
- Respect the rights and property of others
- Observe all national,state and local laws when treasure hunting
- Never destroy historical or archaeological treasures. If you are
not sure about an object you have found, contact a museum or
historical society in your area.
- Leave the land and vegetation as is,and fill in any holes you dig.
- Use the detector only in safe areas
- Dispose of any junk you may find, only in approved areas. Do not
leave it for the next treasure hunter find.
PARTS OF THE METAL DETECTOR
Search
Coil
Lock
Knob
Cable
Control
Box
Battery
Compartment
Handle
Arm
Support
Stem
Coil
Knob
Control
Panel
ASSEMBLY
Only a few adjustments are needed and requires no tools.
Insert Rod to
Join Together
Coil
Knobs
1. Insert stem into lock knob.
2. Adjust the stem to the appropriate length. To extend or retract the
lower stem, loosen the lock knob clockwise and pull or push in the
lower stem to desired length. Then, turn counter clockwise to tighten
the lock knob in place.
3. Adjust the search coil to the scanning position. If necessary, loosen
the coil knob and then tighten coil knob.
Notes:
2
www.barska.com
3
www.barska.com
Treasure Hunter’s Code of Ethics
3
Parts of the Metal Detector
3
Assembly
4
Batteries
4
Checking Battery Levels
4
Control Panel
5
Sensitivity
5
Discrimination
6
Using the Metal Detector
7
On Land
7
Underwater
7
Search Coil Sweeping Hints
7
Search Coil Positioning
7
Ultra Slow Motion
8
Audio Pitch
8
Correct Arm Position
8
Pinpointing a Target
8
Using Headphones
9
Care and Maintenance
9
Warranty
10
