WIN Enterprises PL-80930, Руководство пользователя

Страница: 79 / 117

The length of time this port requires to complete transition from L1 to L0
Fatal Err Over
Enables forcing non-fatal error propogation to the IIO core error logic for this port
Non - Fatal Err Over
Enables forcing non-fatal error propogation to the IIO core error logic for this port
Corr Err Over
Enables forcing correctable error propogation to the IIO core error logic for this port
L0s Support
When disabled, IIO never puts its transmitter in L0s state
PM ACPI Mode
When Disabled, MSI is generated on PM event. When Enabled, _HPGPE message is
generated
Gen3 Eq Mode
PCIe Gen3 Adaptive Equilization Mode
Gen3 Spec Mode
PCIe Gen3 Spec Mode
Gen3 Phase2 Mode
Gen3 Phase2 Mode
Gen3 DN Tx Preset
PCIe Gen3 Downstream Tx Preset
Gen3 DN Rx Preset Hint
PCIe Gen3 Downstream Rx Preset Hint
Gen3 UP Tx Preset
PCIe Gen3 Upstream Tx Preset
Non - Transparent Bridge
Configures port as TB, NTB-NTB, or NTB-RP (DON'T SELECT NTB-RP for legacy IIO
on A0 Si!). On platforms that support NTB, Auto is NTB-NTB.
Enable NTB BARs
If disabled, BIOS will not program NTB BAR size registers
Enable SPLIT BARs
If Enabled, will use two 32 bit BARs instead of 64 bit BAR
Primary BAR 23 Size
Used to set the prefetchable BAR 23 size on primary side of NTB. Value < than 12
or > 29 (39 for BIOS supporting > 4G PCI) disables BAR.
Primary BAR 4 Size
Used to set the prefetchable BAR 4 size on primary side of NTB. Value < than 12 or